The robotic otter: Underwater robot that swims with flippers and can be controlled with a tablet computer

http://www.youtube.com/watch?v=xx0KUqg63F0endofvid

[starttext]

By DAILY MAIL REPORTER

The AQUA robot uses flippers to move and now will no longer need to be tethered


Scientists have developed a remote-controlled robot that can receive and carry out commands while underwater.

AQUA is small and nimble, with flippers rather than propellers, and is designed for intricate data collection from shipwrecks and reefs.

The robot, designed by a team of universities from Canada, can be controlled wirelessly using a waterproof tablet computer.


While underwater, divers can program the tablet to display tags onscreen, similar to barcodes read by smartphones. The robot's on-board camera then scans these two-dimensional tags to receive and carry out commands.

Scroll down to see how the AQUA responds to the new controls.

Cutting the cord on underwater robots has been a longstanding challenge for scientists. Water interferes with radio signals, hindering traditional wireless communication via modem. Tethered communication is cumbersome and can create safety issues for divers.

'Having a robot tethered to a vehicle above water creates a scenario where communication between the diver, robot, and surface operator becomes quite complicated,' says Michael Jenkin, professor at York University’s Faculty of Science & Engineering

'Investigating a shipwreck, for example, is a very delicate operation and the diver and robot need to be able to react quickly to changes in the environment. An error or a lag in communication could be dangerous,' Jenkin says.

Realising there was no device on the market that fit the bill, Jenkin and his team at York's Centre for Vision Research, including the paper's lead author, MSc student Bart Verzijlenberg, set to work constructing a prototype.

The resulting device, fittingly dubbed AQUATablet, is watertight to a depth of 60 feet. Aluminum housing with a clear acrylic cover protects the tablet computer, which can be controlled by a diver using toggle-switches and on-screen prompts.


Until now the robot has receive d instructions using a lead connected to a computer - now it can be controlled wirelessly


'A diver at 60 feet can actually teleoperate AQUA 30-40 feet deeper. Needless to say this is much easier on the diver, physically, and much safer,' Jenkin says.

The tablet also allows divers to command the robot much as if they were using a video game joystick; turn the tablet right and AQUA turns right, too.

In this mode, the robot is connected to the tablet by a slim length of optical cable, circumventing many of the issues of a robot-to-surface tether. The optical cable also allows AQUA to provide video feedback from its camera to the operator.

In wireless mode, the robot acknowledges prompts by flashing its on-board light. Its cameras can be used to build 3-D models of the environment which can then be used to guide the robot to particular tasks.

'This is a huge improvement on [a robot] having to travel to the surface to communicate with its operators,' Jenkin says.

In past, divers have used laminated flashcards to visually communicate with robots while underwater. However, these limit the diver to a pre-set sequence of commands.

'It's impossible to anticipate everything you're going to want the robot to do once you get underwater. We wanted to develop a system where we could create commands on the fly, in response to the environment,' he says.




source: dailymail
[endtext]